China High Quality and Cheap Nylon Injection Molded Plastic Parts automotive injection molded parts

Merchandise Description

Our Support

We can supply the entire range of provider from product design,mold planning, generating, plastic portion molding to printing, assembly, package, and shipping and delivery arrangement.


*We have more than twenty many years creation encounter.

*Totally free Style Service:Despatched us a physical sample our crew presented totally free portion layout function.We also offered cost-free mold style work after agreement signed by both sides.

*Free Mold:Quantity reaches some volume, mould charge can be refund.

*Fast Mildew:For simple and urgent mould,we can pace up to fifteen days to end mould and ship out samples.


* In the support of plastic injection, Perfect plastic is far more than just an injection molder.We offer options to producing from commence to complete.Our experience permits us to give customers with superior solution by delivering,optimum high quality in layout, improvement, and answers for precision injection molding and relevant producing.


Custom made Precision Plastic Injection Molding Providers


We delivers thorough custom plastic injection molding providers to a broad selection of industries. From lower quantity function to higher volume generation runs, we have the skills and amenities to satisfy our customers’ agreement production demands. We provide two shot, sandwich and insert injection molding as well as micro and gasoline help molding. We have the two 10K and 100K production facilities for these customers in the health care, pharmaceutical, meals, beverage and electronics industries. Our complete plastic injection molding talents incorporate machines with clamping forces from 18 to 3,000 tons, making it possible for us to make virtually any plastic portion including micro parts, skinny-walled components, and big factors that require a number of shots.


We can supply and mold any quality of materials from typical commodity quality plastics, to engineering, useful, and structural quality supplies in a range of hues and formulations. In addition to injection molding, we provide many secondary companies such as sonic vibration, RF welding, very hot stamping, etching, printing, plating, and packaging. Our production procedures are extremely automatic, which allows us to run a specific and productive generation floor with minimal overhead expenses. These capabilities enable us to supply fast and cost competitive producing providers to our consumers with no sacrificing precision and quality.

Goods Case


Double-shot molding


        Enclosure plastic injection molding                          Auto areas plastic injection molding                         Medical parts plastic injection molding

Our Advantages

1.Modest details make large difference.All the elements from our company have no sharp edge. All proportions are managed

in accordance to your drawings. Every single solution will be totally inspected and very carefully packed to prevent the bump and rust in transit .

2. The craftsmanship of all parts we machined is managed rigorously, Each merchandise has its possess process card and approach chart.

three. Our high quality inspection process is fairly should self-inspected in the course of generation, we have circulation inspectors and
professional inspectors.

four. Each and every measurement of merchandise must be analyzed 1 by 1 right after finishing production.
If You Want To Create Anything But No Capability To Design

You:I want to make a new product,but i only have hand created sketches,can any individual support me ?

Mogel:No fear at all.We have quite
powerful expert engineering and planning team,occur to us,you will be in good palms.

I Have No Notion What Shoud I Do To Provide My Thought Into A True Product
You:This is my initial time to produce a new product,i have no thought what should i do to make it take place.

Mogel:No fret at all.We will provide content recommendation and CZPT you via the design and style and price assessing phase,relaxation depart it
to us..


Business Profile


HangZhou Mogel Hardware & Plastic Co., Ltd. was launched initially as a Plastic injection molding and tooling fabrication plant from2006, afterwards expanding quickly and established up Mogel Business Minimal in HK, we have several divisions,focusing on turnkey solutions inclusive of the CNC machining, Punching, Stamping and assembly .


In addition to currently being an OEM manufacturing facility, we also have the capacity of item analysis and advancement (R&D). We have industrial,mechanical and digital style engineers We help our customers make their suggestions grow to be ultimate merchandise. Based on our comprehensive encounter and deep comprehending of mechanical and plastic parts production,and now turn out to be a growing innovative mechanical , plastic factors engineering design and style and producing company.

Mogel team is very pleased to supply a extensive suite of compact and expense-successful items to our companions, checking and upkeep functions with the utmost in good quality. Our manufacturing unit are engaged in mechanical and plastic elements manufacturing over ten years with our objective to leverage on our synergetic capacity to add value to our customer and increase the company collectively.

Strict inspection we do in the course of operation

1. Seasoned QC testers to examine the products dimension, surface and overall performance in accordance to drawings specification.
two. Experienced IQC to examine the dimensions and surface area of the incoming substance.
three. Skilled PQC to inspect total-course throughout the processing.
4. Knowledgeable FQC to inspect all the plating goods from outsides and make the one hundred% inspection before the shipments.

Quality sample will be provided for your tests prior to production according to ISO 9001: 2008.
We are pleased to service you with excellent quality, realistic cost and increase withyou jointly.


Q1.How to have my factors quoted ?

A1: Remember to contact us by means of TradeManager or E-mail and ship us your drawings inclusive of 2nd and 3D (.Step or .IGE file) and detail specifications. We are happy to indicator NDA with you if you choose. Then our engineering group will function on them and submit competitive quotation to you.

Q2.What is the lead time for tooling and samples fabrication?
A2: The specific guide time relies upon on your components specification.
The standard guide time is forty*45 times for tooling fabrication and samples.
If the tooling is not essential, the guide time for samples is fifteen times generally.

Q3.Can I have prototypes for tests ahead of tooling ?
A3: Indeed, our factory have team to support prototypes with machining process to fabricate them for your tests.

Q4.How to ship the samples and production get ?
A4: We will normally ship samples through DHL, UPS or FedEX by means of our cooperated forwarder or freight collect. For the delivery of generation get, it will be by sea or by air

Q5.How to make sure the quality of parts?
A5: Firstly, our staff will examine all incoming material. QC team will examine areas while manufacturing and concluded goods, then submit Top quality Inspection Report jointly with samples and manufacturing buy.

US $1-120
/ Piece
1 Piece

(Min. Order)


Plastic Type: Thermosetting Plastic
Plastic Form: Granule
Molding Method: Injection Molding
Lead Time: 25~35 Days
Surface: Polishing or Custom
Material: ABS, PC, PA66, Nylon etc. or Custom Material


US $1-120
/ Piece
1 Piece

(Min. Order)


Plastic Type: Thermosetting Plastic
Plastic Form: Granule
Molding Method: Injection Molding
Lead Time: 25~35 Days
Surface: Polishing or Custom
Material: ABS, PC, PA66, Nylon etc. or Custom Material



Factors to Consider When Converting a Design to Injection Molding

When considering injection molding for your design, there are several things you should consider. These factors include design, material selection, process, and reliability. In addition, you should consider the price of each part. The average cost per injection molded part is between $1 and $5. If you want to reduce your costs and improve your production cycle, look into converting your design to injection molding.

Design considerations for injection molded parts

Injection molded parttInjection molded parts must meet certain design considerations to ensure quality and precision. Design considerations include proper material choice, process control, and tool design. In addition, designers must consider the tolerance ranges for the parts to be produced. These tolerances will differ from molder to molder, and designers should discuss their specific needs with their molders before they begin production. Designers must also consider possible revisions to the mold, such as making the part more or less tighter.
When designing injection molded parts, the designer should consider the thickness of each wall. This will minimize stresses that may arise due to uneven wall thickness. Parts with uneven wall thickness can develop sink marks, voids, and molded-in stresses. This can result in longer production time and increased cost. Moreover, irregular wall thickness can restrict material flow. To minimize these problems, designers should make the transitions between the different thicknesses smooth.
Another important design consideration is the use of bosses in injection molded parts. Bosses are typically used as points of assembly and attachment in injection molded parts. Bosses are cylindrical projections with holes for threaded inserts and other fastening hardware. Injection molded parts with bosses are generally able to accommodate multiple threaded inserts without stripping. These inserts are also durable and enable several cycles of assembly.
The thickness of the walls is another important consideration when designing injection molded parts. The thickness of walls will determine many key characteristics of the part. Careful consideration of this feature will prevent expensive mold modifications and delays. The nominal wall thickness should be determined based on the functional requirements of the part. Likewise, the minimum wall thickness should be set based on acceptable stress. If the walls are too thin, air will collect between them and compromise the functional performance of the part.

Material selection

Selecting the right material for your injection molded parts is an important part of the process. While there are many options, there are also many factors to consider. For instance, what kind of end product are you producing? Whether it’s a consumer part for your home or a complex part for the aerospace industry, you’ll need the right material for the job.
There are literally hundreds or thousands of types of plastic materials available for injection molding. One of the most common types is ABS, a polymer that has a high degree of structural strength and low cost. Another popular choice is polycarbonate, which offers excellent heat resistance and transparency. Alternatively, you can opt for Ultem, a high performance plastic that’s commonly used in medical and aerospace applications.
The process of designing plastic products involves a combination of art and science. The goal of this process is to create a high-quality product that meets the expectations of consumers. By doing this, you’ll reduce production costs and increase profits. It’s not an easy process, but it’s well worth the effort.
Injection molding is an efficient and versatile method of manufacturing medical devices. It can be done in high volumes and with high flexibility. In addition to this, it also offers a broad range of materials. This is important when your parts need to be made of different materials with unique physical properties. For example, if you’re producing toys, you’ll want to use Acrylonitrile Butadiene Styrene (ABS). ABS is also a great option for medical applications because it can withstand the high temperatures and pressures of medical environments.
When choosing plastic injection molding materials, keep in mind the weight and stiffness of the material. Some applications require hard plastics, while others require softer materials. In addition, the material’s flexibility will determine how much you can bend it.


Injection molded parttInjection molding is a process in which plastic parts are formed by pressing melt into a mold. The process takes place in two stages. During the first step, the material is injected and heated, while the second stage is when the mold is opened and the part ejected. The part is then finished and ready for use.
The material used in injection molding is made from a variety of polymers. Common polymers include nylon, elastomers, and thermoplastics. Since 1995, the number of materials used in injection molding has increased by 750 percent. Some materials are newly developed while others are alloys of previously-developed materials. The selection of material primarily depends on the strength and function required by the final part. Also, the cost of the material is a critical factor.
The design of custom components for the molding process should be carried out by a skilled industrial designer. There are a number of design guidelines for plastic parts, which should be followed carefully to achieve high quality and dimensional accuracy. Failure to follow these guidelines can lead to undesirable results. Therefore, it is crucial to specify specific requirements for the parts before the process begins.
The process is reliable and highly repeatable, making it ideal for large-scale production. Injection molding also allows for the creation of multi-cavity injection mold parts, which can create several parts in one cycle. Other advantages of the injection molding process include low labor costs, minimal scrap losses, and low post-mold finishing costs.
Before beginning the full production run, technicians perform a trial run. In this test, they insert a small shot weight in the mould. Then, they apply a small holding pressure and increase the holding time until the gate freezes. Then, they weigh the part to check if it is right.


Injection-molded parts are subject to a variety of defects. One of the most common is unwanted deformation. This may happen when the temperature of the mold is too high or there is not enough plastic injected into the mold. Another problem is millidiopter range distortion. This distortion is invisible to the naked eye, and cannot be detected by manual inspection. Regardless of the cause, preventing unwanted deformations is critical for the long-term performance of the part.
The process of creating a custom mould for a plastic component requires great skill. Creating a mould that is perfectly suited to the product is important, because a good mould is crucial in avoiding potential defects. Traditionally, this process relied on the skill of a toolmaker and trial-and-error methods. This slows down the process and increases the cost of production.
Another factor contributing to injection molded parts’ reliability is the high level of repeatability. Injection molding is ideal for high volume production, because parts are easily re-molded. However, the process can be prone to failure if there is no quality control. While most injection-molded parts will last for a long time, parts that are prone to wear will eventually fail.
Besides high level of consistency and reliability, injection-molded parts are also eco-friendly. Unlike other manufacturing methods, the injection molding process produces little to no waste. Much of the plastic left behind in the process can be recycled, making it a green alternative. Another benefit of this manufacturing method is automation, which helps reduce production costs. Overall, injection molding is a highly reliable and consistent product.
Injection molding requires precise measurements and a 3-D model. It is also important to check for wall uniformity and draft angles. Properly-designed parts can avoid deformations. If the wall thickness is too low, support ribs can be used. Proper draft angles are important to ensure that the part can be removed easily from the mold.


Injection molded parttThe cost of injection molded parts depends on many factors, including the complexity of the part and the mold design. Simpler designs, fewer CAD steps and simpler processes can help companies minimize costs. Another factor that affects the cost of injection molded parts is the geometry of the part. In general, complex geometries require more design work and tooling time. Additionally, thicker walls require more material than thin ones, which raises the cost of the part.
The amount of plastic used in the mold is also a key factor. Injection molding requires large quantities of material, so parts that are larger will require a larger mold. Larger parts are also more complex, so these require more detailed molds. A mold maker will be able to advise you on how to design your part to cut down on costs.
The next major factor affecting the cost of injection molded parts is the material of the mold. Most injection molds are made of steel, but the type and grade of steel used is important. Additionally, tight tolerances require molds with virtually wear-free interior cavities. Hence, higher-grade steel is required.
Another factor affecting the cost of injection molded parts is the price of mold tools. Depending on the size and complexity of the part, the cost of molding tools can vary from $10,000 to several hundred thousand dollars. Injection molding tooling is an integral part of the entire process and can add up to a significant portion of the overall cost of the part.
Draft angles are another factor that affects the cost of injection molded parts. A draft is an important design element as it allows for easy part separation and removal from the mold. Without a draft, it would be very difficult to remove a part after injection.
China High Quality and Cheap Nylon Injection Molded Plastic Parts     automotive injection molded partsChina High Quality and Cheap Nylon Injection Molded Plastic Parts     automotive injection molded parts
editor by czh 2023-01-31